The method that is adopted by the plumbers to unclog a bathroom sink depends on what kind of clogging has occurred. One can flush the clog with baking soda and vinegar if it is just soap deposits. While plunging or tweezing works better when the clog is formed by hair. So, it is very crucial to figure out which is the best way of unclogging the drain after inspecting the drain clogging problem thoroughly.
Plumber
Why is a Bathroom Sink Usually Get Clogged?
Here are the major reasons why the bathroom drains get clogged:
- Hair clumps – When clumps of hair enter the drain of the bathroom sink, this gets struck on components of the drain or the walls of the drain. The usage of the zip-it tools or tweezing removes the hair from the clogged drain very well. In case any of these ceases to work, then the plumber dissembles the entire drain.
- The solid object struck in the p-trap – The p-trap is the curving pipe that lies below the bathroom sink and connects directly to the pipe in the wall. In case any solid object falls down the drain, this might end up getting stuck in the p-trap. In such a case, the plumber will remove this unwanted object and then clean the p-trap.
- Scum of soap – Scum of soap can be built up in the drain pipes over the course of time. Pouring one pot full of boiling water in the drain or even using vinegar and baking soda will help in clearing the drain in this case. You can plunge pouring some warm water and the drain would be cleared.
- Damaged pipes – Corrosion, rust and several kinds of common types of pipe damage can potentially lead to clogging the bathroom drain eventually. The plumber, in this case, can replace the rusted pipes at the earliest. They can also adopt special ways like snaking or plunging them and this may help in clearing the drain temporarily.
Ways of Unclogging The Bathroom Sink
Once the reason for the drain clogging is figured out, the plumber uses one of the following techniques to unclog the bathroom drain.
- Using white vinegar and baking soda
- In this process, you need to remove the drain cover by unscrewing it and then the sink stopper is to be removed.
- You can then measure around one full cup containing white vinegar and a half cup filled with baking soda.
- Then pour the half cup of baking soda down the clogged drain.
- After that, pour the cup full of vinegar into the drain.
- Then you have to allow this mixture to sit inside the clogged drain for some time until the phenomenon of fizzing stops.
- Then the plumber rinses the hot water inside the drain,
- This process is to be repeated three times for achieving the best results.
Plumber
2. The procedure of plunging
- In this, the plumber, use a cup plunger.
- Then you need to remove the stopper.
- The outlet of the sink overflow is to be sealed with a rag or tape.
- Then you need to put down some rags or towel on top of the floor around the sink.
- Next, the plumber fills in the bathroom sink with some warm water.
- The plunger’s cup is to be used for creating an airtight seal on top of the drain.
- Then the plumber pumps the plunger’s seal in an up & down position many times with sharp and quick movements.
- Then the plumber tests the drain to check if the clog is cleared.
- This procedure is repeated a few times for the complete unclogging of the bathroom sink drain.
Conclusion
The plumbers use specialized techniques for unclogging the bathroom sink for the best results. They adopt the proven techniques for achieving the best outputs.
