Tips for water leak detection in the kitchen or bathroom

16 May 2018

Water supply and water drainage are two essential systems of a household that ensure a healthy and comfortable life for the residents. However, if any leakage occurs from any of these water-based systems at home then the situation may become maddening for the people living there, with water flooding all over the place. Hence, early water leak detection can save them from huge problems and prevent disruption of their normal lifestyle. When the exact spot of leakage is detected on a pipe, it can be repaired very fast as well, putting an end to the problem immediately.

Water Leak Detection

Various Ways Used for Water Leak Detection

1. The leakage of the toilet can be detected by opening the lid of the toilet tank.  By pressing your ear to the side of the tank, you can hear a hissing sound that is created by the water leaking from the valves or pipes of the toilet tank. The water leak detection may also be done by putting a few drops of food color into the water of the tank and checking the oozing of colored water into the bowel. This is caused by a leakage in the flapper valves.

2. The hot water tank attached to the geyser may often leak and can be detected by listening to the hissing sound of the hot water issuing out of the pipes. A plumber can detach the associated drainpipe and locate the exact leaking spot there.

3. If no leakage is initially found anywhere in the house, the best way to detect water leaks is to check the readings of the water meter attached to the water supply system of the home. First of all, the water supply to the house should be shut off completely by closing the related valve. If the meter is still running normally, there could still be a leakage between the meter and the water supply system of the house. However, if the meter is found to be still on closing the valve then the leakage is inside the plumbing system of the home.

Leak Detection

4.The basement and the attic floors are the most neglected parts of a house, where leakage of water cannot be easily detected. It is therefore best to engage the services of a water detector device for accurate water leak detection. This device may be installed in places that are more prone to water leakages, such as the water heating system, washing machine or the foundation of the building.

5. The faucets are the most leakage prone areas of the water supply system, where water may start leaking due to the old rubber washer that has been torn or damaged. The replacement of this washer just below the metallic handle of the faucet is the only way to address the leakage problem here.

6. The pipelines leading to the sinks, showerheads and the bathtubs often exhibit leakages and the homeowner needs to check all these places carefully for water leak detection. The PVC pipes used nowadays are more vulnerable to leakages under heavy water pressure and thus need frequent checkups to stop the water wastage.

Apart from the indoor water systems, outdoors should be checked for leakage as well. Often the water supply at the garden or the swimming pool may show signs of leakages through the unexplained moist soil and water accumulation at certain spaces. However, it is best to hire a professional plumber for water leak detection because they will help in resolving the concerned issue immediately and avert the unnecessary loss of water.